Azet Continu Clean

• Application: interior
• Dilution: water
• Packaging: 5 – 10 litres
• Colours: white and light colours

 SAFETY DATA SHEET

AZET CONTINU CLEAN

Azet Continu Clean is a matt, highly washable wall paint based on a synthetic resin dispersion. This wall paint is easy to apply with a roller and Airless/Aircoat spray equipment. Azet Continu Clean has excellent coverage. It also retains its matt finish after cleaning.

Application
Azet Continu Clean is used indoors on walls and ceilings that need to be cleaned frequently and intensively. This includes kitchens, schools, hospitality venues and other heavily used spaces. Suitable substrates include old layers of wall paint, plaster, concrete, masonry, plasterboard and glass fibre.

Preparation
• Remove all loose parts and blisters.
• Wash chalky, dirty and greasy substrates with Azet Expo.
• Sorbent and 'lightly chalky' substrates must be pretreated with Azet Grondering W or Azet Voorstrijk Dekkend.

Application
Azet Continu Clean is applied to a dry substrate. Stir well and dilute with clean water if necessary.

Cleaning instructions
Azet Continu Clean is an optimally washable, extra matt wall paint based on a special binder combination. The dry paint film has a water-repellent effect to reduce dirt adhesion and remains matt after cleaning. Optimal washability is achieved after full curing over 30 days.
The most common contaminants can be easily and effectively removed with sufficient clean, lukewarm water, and if necessary, a mild soap or washing-up liquid. Use a clean, NON-abrasive sponge and allow the surface to dry by evaporation. If necessary, the surface can be rinsed again with sufficient lukewarm water to remove soap residues; allow the surface to dry by evaporation.

Technical data
• Application conditions: ambient and substrate temperature at least 6°C
• Dilution: dilute with clean water up to max. 10%
• Application tools: brush, nap roller

Airless spray
– nozzle 0.017” – 0.019”
– pressure approx. 180 bar
Airmix/Aircoat
– nozzle 0.015”-0.019”
– pressure approx. 125 bar
– air pressure approx. 1 ½ bar

• Coverage: 6-8 m² per litre
• Drying time: after 1 hour
• Overcoating: after 6 hours
• According to EN 13300: scrub resistance class 1, at a coverage of 7m²/ltr.

Practical information
• Tool cleaning: with water immediately after use.
• Storage: store frost-free.
• Shelf life: at least 1 year in unopened original packaging.
• Packaging: 5 and 10 litre buckets
• Colour: available in white and light colours (check colours before application)
• Safety: consult the safety data sheet for Azet Continu Clean.

PLEASE NOTE: PAINT/WALL PAINT/COATINGS CANNOT BE RETURNED! These are made to order.

We cannot accept any liability based on the data in this technical product information because the application, application method and conditions of application of this product are often outside our control.

Due to raw material shortages, pigment prices vary daily, so dark colours are always available on request.
For more information, email: info@gigapaint.nl