Azet Integra Matt Lacquer PU/AC

• Application: indoors and outdoors
• Thinning: water
• Packaging: 0.5 – 1 – 2.5 l.
• Colours: white and light colours

AZET INTEGRA MATLAK PU/AC

Integra Matlak PU/AC is a water-borne topcoat based on a polyurethane/acrylate binder. This topcoat is easy to apply and flows excellently. Integra Matlak PU/AC is wear- and scratch-resistant and does not yellow.

Application
Integra Matlak PU/AC is applied indoors to wood, stone, plasterwork, asbestos cement and hard plastics treated with a suitable undercoat/primer. On well-adhering old paint layers, Matlak PU/AC can be applied directly after cleaning and sanding.

Preparation
• Remove poorly adhering old paint layers.
• Clean/degrease the substrate with Azet Expo.
• Rinse with clean water.
• Prime bare areas.
• Sand the substrate to a matte finish and remove all dust.

Application
Stir well before use. The wood must be thoroughly dry before painting. Applying the recommended film thickness ensures optimal flow. Always finish the primer/undercoat with 2 coats of Integra Matlak PU/AC.

Practical information
• Tool cleaning: with soap and water immediately after use.
• Storage: Store frost-free.
• Shelf life: at least 1 year in the unopened original packaging.
• Packaging: 0.5 – 1 – 2½ litre tins.
• Colour: white and almost all colours via the Azet colour mixing system.
• Safety: consult the safety data sheet for Integra Matlak PU/AC.

PLEASE NOTE: PAINT/WALL PAINT/VARNISH CANNOT BE RETURNED! These are made to order.

We cannot accept any liability based on the information in this technical product information, as the application, application method and conditions when applying this product are generally beyond our control.

Due to a shortage of raw materials, pigment prices vary daily, so dark colours are always available on request.
For more information, email: info@gigapaint.nl