Azet Candor Industrial Lacquer Gloss

• Application: interior and exterior
• Thinning: white spirit
• Packaging: 1 – 2.5 litres
• Colours: almost all colours available

Azet Candor Industrial Gloss Paint is a fast-drying gloss paint based on a PU-reinforced alkyd resin binder. Its ease of application and excellent flow, combined with outstanding coverage, ensure a smooth finish.

APPLICATION
Exterior and interior
Azet Candor Industrial Gloss Paint is primarily used outdoors as a durable primer and topcoat on pre-treated metal. Thanks to its corrosion-inhibiting properties and excellent exterior durability, Candor Industrial Paint is the best choice for metal protection.

SURFACE PREPARATION 
• Remove any defective old paint layers.
• Completely remove rust and zinc salts.
• Degrease and sand the surface.
• Carry out repairs where necessary.
• Prime bare non-ferrous and ferrous metal with two coats of Azet Candor Multiprimer.
 Please note! Prime bare galvanised steel with a 2K epoxy primer.
• Lightly sand the primer once dry.

APPLICATION 
Apply Azet Candor Industrial Gloss Paint to a dry surface. The properly prepared surface can be given a preliminary coat of Industrial Gloss Paint (locally, where needed). Lightly sand once dry. Then apply a topcoat of Candor Industrial Gloss Paint over the entire surface.
This product can be applied by brush, roller or spray.
Airless spray data:     
Spray pressure      120–150 bar
Nozzle           0.0013–0.0015 inch    

Important! Check the dew point before application and, when coating larger surfaces, during application as well. The surface temperature must be at least 3°C above the dew point.

TECHNICAL DATA
Application conditions    
Ambient temperature at least 5°C; surface temperature at least 3°C above the dew point.
Relative humidity             Maximum 85°C
Volume solids                          55% (by volume)
Gloss level                                    Gloss, approx. 85 GU at 60° (after 1 month)
Film thickness                               approx. 35 micrometres dry at approx. 70 micrometres wet
Thinning                                    Maximum 5% white spirit (methylated spirits may be used for spray application)                                                       
Application tools               Brush, roller or spray
Coverage                                    12–14 m2/litre (theoretical)
Dust dry                                      After approx. 3 hours (dark colours and thicker coats extend the drying time)                                                               
Recoatable                           After 16 hours

PRACTICAL INFORMATION
Cleaning tools                  Clean immediately after use with white spirit
Storage                                          Cool and dry
Shelf life                               At least 12 months in unopened original packaging                                                                 
Packaging                                   1- and 2.5-litre tins
Colour                                             White and almost all colours via the Azet colour-mixing system                                                                                 
Safety                                     Consult the safety data sheet for Azet Industrial Gloss Paint.

PLEASE NOTE: PAINT/WALL PAINT/VARNISHES CANNOT BE RETURNED! These are made to order.

We cannot accept liability on the basis of the information in this technical product information, as the application, processing and conditions under which this product is applied are generally beyond our control.

Due to a shortage of raw materials, pigment prices vary daily, so dark colours are available on request only.
For more information, email: info@gigapaint.nl