Giga Paint Wall Paint Giga Matt S1

✔ Very good coverage
✔ Very easy to apply
✔ Meets scrub class 1 (DIN 13300)

GIGA PAINT GIGA MAT S1 WALL PAINT

A very well-covering, water-based interior wall paint that is very easy to apply. Suitable for ceilings, masonry and plasterwork, concrete, aerated concrete, gypsum elements, etc.

APPLICATION:

Application conditions:
The following conditions are necessary for the product to dry (and cure) properly:
- Stir well before use
- Minimum relative humidity of 10% and maximum relative humidity of 75%
- Substrate and ambient temperature between 10°C and 25°C
- The substrate temperature must be at least 3°C above the dew point.
- Ensure adequate ventilation

Application method:
Apply the product with a brush or roller suitable for the substrate and desired finish.

SYSTEM – PREPARATION

General:
- Remove dirt, dust and irregularities
- Carefully remove mould/soap residues with a suitable cleaner.
- The substrate must be clean, dry and dust-free. Degrease if necessary.
- Remove damaged and/or loose paint layers.
- Where necessary, restore/repair the substrate with a suitable repair product.
- After drying, sand the repaired areas smooth.

PRODUCT PROPERTIES:

General: The properties of the product also depend on the colour, applied layer thickness and application conditions. The values shown are based on the white variant.

PLEASE NOTE: PAINT/WALL PAINT/COATINGS CANNOT BE RETURNED! These are made to order.

We cannot accept any liability based on the data in this technical product information because the application, application method and conditions of application of this product are often beyond our control.

For more information, email: info@gigapaint.nl