Giga Paint Mold-Resistant Wall Paint
Giga Paint Mold-Resistant Wall Paint
Couldn't load pickup availability
Vaak samen gekocht
Productomschrijving
✔ Suitable for wet rooms
✔ Detergent resistant
✔ Semi-matt
✔ Easy to clean
✔ Scrub class 1
INFORMATION SHEET - Giga Paint Mould-Resistant Wall Paint
GIGA PAINT MOULD-RESISTANT WALL PAINT
The Giga Paint Mould-Resistant Wall Paint is suitable for substrates in wet rooms such as bathrooms. For treating walls and ceilings. Suitable for mineral substrates such as; plasterwork, masonry, concrete, aerated concrete, gypsum elements and fiberglass.
For new builds, renovations and maintenance work.
APPLICATION:
Application conditions:
The following conditions are necessary for proper (through) drying of the
product:
- Stir well before use
- Minimum relative humidity of 60% and a maximum relative humidity of 85%
- Substrate and ambient temperature between 10°C and 25°C
- The temperature of the substrate must be at least 3°C above the dew point.
- Ensure sufficient ventilation
- Thinning is not necessary. If necessary, thin with clean water.
Application method | Airless spray:
- Spray opening: 0.015 inch – 0.019 inch (tip 15 & tip 19)
- Spray angle: 40, 50 or 60 degrees (angle 4, 5 or 6)
- Spray pressure:
80-140 bar (when using low pressure in combination with a low pressure tip)
160-220 bar (When using a high pressure spray tip)
- Thinning is not necessary. The product is ready to use. If necessary, thin by 0 -1% with (clean) water.
| Drying at 20°C and 65% RH: | |
| Dry to touch: | After approximately 1 hour |
| Recoatable: | After approximately 12 hours |
SYSTEM – PREPARATION
General:
- Remove contaminants, chalking and irregularities
- Remove mould/or soap residues carefully with a suitable cleaning agent.
- Substrate must be clean, dry and dust-free. Degrease if necessary.
- Remove damaged and/or loose paint layers.
- Maximum moisture content: Gypsum-bound substrates; 1% Stone-like substrates; 4%
- Always test the load-bearing capacity of the substrate by means of an adhesion test.
PRODUCT PROPERTIES:
| PROPERTIES | |
| Binder: | Acrylic dispersion |
| Density at 20°C: | Approximately 1.40 kg/dm³ |
| Solid content: | 37.8% volume |
| Gloss level: | Semi-Matt |
| Theoretical yield: | 8 - 10 m²/liter |
| PRODUCT DATA | |
| Cleaning: | Clean the equipment immediately after use with water. |
| Storage: | Store in a cool, dry and frost-free place. |
| Shelf life: | Approximately 18 months in unopened packaging. |
General: The properties of the product are also dependent on the color, applied layer thickness and application conditions. The values shown are based on the white variant.
PLEASE NOTE: PAINT/WALL PAINT/COATINGS CANNOT BE RETURNED! These are made to order.
We cannot accept any liability based on the data in this technical product information because the application, the application process and the conditions during application of this product are often outside our scope of assessment.
For more information, email: info@gigapaint.nl
