Hempel's Brilliant Gloss 53200

• High gloss
• Topcoat
• Resistant to salt water and pollutants

Delivery time: 1–5 working days.

HEMPEL’S BRILLIANT GLOSS 53200

Hempel's Brilliant Gloss is a high-gloss topcoat based on modified alkyd, offering optimum colour and gloss retention. Flexible and resistant to salt water and pollutants. Easy application ensures a particularly attractive finish.

What is it used for?
For use on polyester, wood and steel. For interior and exterior use. Above the waterline.

Available colours & sizes
Colours: Pure White 10231 - Cream 21401 - Flag Blue 35141 - Ice Blue 38140 - Bordeaux Red 53121 - Cobalt Blue 34161 - Souvenirs Blue 32800 - Britannia Blue 31810 - Marine Green 46121 - Radiant Red 54121 - Survival Orange 50190 - Black 19990 - Pale Grey 12011 - Smoke Grey 12221 - Polar White 10501 - Off White 10381 - Matterhorn White 10121 - Town Grey 10141
Sizes: 375ML - 750ML - 2.5L

Flash point                                            40°C [104°F]

Cleanliness
- Remove oil, grease and other contaminants with a suitable detergent.

New construction:
- Untreated surface: Prepare bare substrates according to Hempel's primer instructions.

Maintenance and repair
- Previously painted surface: Sand, clean and dry the surface.

Thinner
Hempel's Thinner 811 08111
Cleaner
Hempel's Thinner 811 08111

Application method
Tools
                                    Max. vol. thinning
Brush                                       5%
Roller                                        5%
Paint pad                                 5%
Keep thinning to an absolute minimum.
The product can be applied by spraying

Application conditions
- Prevent condensation by applying to a clean, dry surface at a temperature more than 3°C [5°F] above the dew point.

- Theoretical coverage                     11 m²/L

Relative humidity
- Relative humidity must be below 85% during drying and curing.

Notes
- Stir well before use.
- Thinning may be necessary for good topcoat formation. Maximum thinning is 5%.
- Apply 2–3 coats of the product.
- To obtain a smooth surface, sanding between coats is recommended (remove dust).

Product compatibility
- Previous coat: Recommended product: Hempel's Primer Undercoat
- Subsequent coat: None.

Recoating
                                                             10°C [50°F]     20°C [68°F]     
Dust-dry in hours                                       8                      4
Ready to polish                                  -                     24
Specified for a dry film thickness of 50 microns [2.0 mils] under standard conditions.
Masking tape used during paint application must be removed while the paint is still wet.

Drying time Surface temperature
                                                             10°C [50°F]     20°C [68°F]     
Minimum                                                 20h                     10h
Maximum                                                5.5d                    72h

Drying conditions
- Condensation on freshly applied coating must be avoided.
- To achieve the stated drying time, it is important to maintain adequate ventilation during application, drying and curing

Other notes
- The surface must be clean before recoating.

Shelf life
Ambient temperature                         25°C [77°F]
Product                                                      60 months

Shelf life from the date of manufacture when stored in the original, unopened packaging. Product quality must be checked again after this period. Storage at high temperatures may shorten the shelf life. 

Storage conditions
- The product must be stored in accordance with local regulations, at 5°C [41°F], out of direct sunlight and protected from rain and snow.

PLEASE NOTE: PAINT/WALL PAINT/VARNISHES CANNOT BE RETURNED! These are made to order.

We cannot accept any liability based on the information in this technical product data sheet, as the application, handling and conditions under which this product is applied are often beyond our control.

For more information, email: info@gigapaint.nl